Please join our mailing list for ExtremeBrightLEDs news and exclusive discount !






You are here: Home > LED Decoder / Load Resistor
Sort By:
Page of 1
TWO 50W 6ohm Load Resistors Fix LED SMD Turn Signal Blinker Hyper Flash Error
Our Price: CDN$22.09

You are getting TWO (2x) 50W 6ohm Load Resistors and FOUR (4x) Quick Connectors (T-tags or Splices).

This can be used to fix the hyper flashing of the turn signal lights after you installed the LED bulbs.
Each LED Turn Signal bulb need one 50w 6ohm Load Resistor.
If you are planning to install all four LED turn signal (front and rear), you can get the 50w 3ohm Load Resistors which only need to install to the front left/right OR rear left/right.

It can also fix the bulb out warning of the European cars such as BMW, Audi, Mercede Benz when you installed LED bulbs to the sidemarkers, parking or license plate lights.

You can simply tag the Load Resistor to the positive and negative wires of the bulb socket using the Quick Connectors (or known as T-tags, Splices, four connectors included).

The 50w 6ohm Load Resistors can be use for 1156/1157, 3156/3157, 7440/7443/992A.

Lifetime Warranty!
TWO 50W 3ohm Load Resistors Fix LED SMD Turn Signal Blinker Hyper Flash Error
Our Price: CDN$24.69

You are bidding for TWO (2x) 50w 3ohm Load Resistors and FOUR (4x) Quick Connectors (T-tags or Splices).

This can be used to fix the fast flashing of the turn signal lights after you installed the LED bulbs.

If you are planning to install LED turn signal bulbs for the front and rear, you can just get these 50w 3ohm Load Resistors and install them to the front left and right OR rear left and right, not like the 50w 6ohm Load Resistors which you are required to install one per LED turn signal bulb.

It can also fix the bulb out warning of the European cars such as BMW, Audi, Mercede Benz when you installed LED bulbs to the sidemarkers, parking or license plate lights.

You can simply tag the Load Resistor to the positive and negative wires of the bulb socket using the Quick Connectors (or known as T-tags, Splices, four connectors included).

The 50w 3ohm Load Resistors can be use for 1156/1157, 3156/3157, 7440/7443/992A.

Lifetime Warranty!
TWO 9005 9145 9006 H11 LED Light Bulb Warning Canceler Decoder Error Free Plug
Our Price: CDN$38.99

You are bidding for a pair of (2x) Brand New wiring harness with pre-wired sockets and built-in LED Resistor. This product can be used to fix the problem after installing LED fog or DRL light bulbs. It can also be used to cancel the On Board Computer (OBC) or Bulb-Out Warning after install LED bulbs. They are fully plug and play, simply plug the LED bulb to the socket of the canceler, then insert the plug of the canceler to the factory socket.

-100% Brand New
-Pre-wired, east plug and play
-Made with high quality Nylon Material, heat resistant
-Built-in LED Resistor
-Compatibility: 9005, 9145, 9006, H11 (Please choose the model you need).

Lifetime Warranty!
1156 2056 7506 LED Light Bulb Warning Canceler Decoder Fix Hyper Flash Error Free Plug
Our Price: CDN$48.09

You are bidding for a pair of (2x) Brand New 1156/7506 wiring harness with pre-wired sockets and built-in LED Decoder and Resistor.  

This product can be used to fix the hyper flash of the turn signal after installing LED bulbs.

-not for Switchback Dual colour bulb
-not for parking and turn signal which share same set of bulbs
-not for brake/tail and turn signal which share same set of bulbs
-not for brake lights

It can also be used to cancel the OBC or Bulb-Out Warning after install LED bulbs.

They are fully plug and play, simply plug the LED bulb to the socket of the canceler, then insert the plug of the canceler to the factory socket.

-100% Brand New
-Pre-wired, east plug and play
-Made with high quality Nylon Material, heat resistant
-Built-in LED Decoder and Resistor
-Compatibility: 1156 1073 1093 1129 1141 1147 1159 1259 1295 1383 1459 1619 1651 1680 2056 7506

Lifetime Warranty!
1157 2057 2357 7528 LED Light Bulb Warning Canceler Decoder Fix Hyper Flash Error Free Plug
Our Price: CDN$48.09

You are bidding for a pair of (2x) Brand New 1157/2057/2357/7528 wiring harness with pre-wired sockets and built-in LED Decoder and Resistor.  

This product can be used to fix the hyper flash of the turn signal after installing LED bulbs.

-not for Switchback Dual colour bulb
-not for parking and turn signal which share same set of bulbs
-not for brake/tail and turn signal which share same set of bulbs
-not for brake lights

It can also be used to cancel the OBC or Bulb-Out Warning after install LED bulbs.

They are fully plug and play, simply plug the LED bulb to the socket of the canceler, then insert the plug of the canceler to the factory socket.

-100% Brand New
-Pre-wired, east plug and play
-Made with high quality Nylon Material, heat resistant
-Built-in LED Decoder and Resistor
-Compatibility: 1157 1016 1034 1152 1154 1158 1493 2057 2357 2397 7528 3496

Lifetime Warranty!
3157 3057 LED Light Bulb Warning Canceler Decoder Fix Hyper Flash Error Free Plug
Our Price: CDN$48.09

You are bidding for a pair of (2x) Brand New 3157/3057 wiring harness with pre-wired sockets and built-in LED Decoder and Resistor.  

This product can be used to fix the hyper flash of the turn signal after installing LED bulbs.

-not for Switchback Dual colour bulb
-not for parking and turn signal which share same set of bulbs
-not for brake/tail and turn signal which share same set of bulbs
-not for brake lights

It can also be used to cancel the OBC or Bulb-Out Warning after install LED bulbs.

They are fully plug and play, simply plug the LED bulb to the socket of the canceler, then insert the plug of the canceler to the factory socket.

-100% Brand New
-Pre-wired, east plug and play
-Made with high quality Nylon Material, heat resistant
-Built-in LED Decoder and Resistor
-Compatibility: 3157 3057 3155 3357 3457 3757 4057 4157

Please make sure the factory car plug is similar to the one in the picture (with two tags - one big one small) before placing order.

Lifetime Warranty!
7440 LED Light Bulb Warning Canceler Decoder Fix Hyper Flash Error Free Plug
Our Price: CDN$48.09

You are bidding for a pair of (2x) Brand New 7440 wiring harness with pre-wired sockets and built-in LED Decoder and Resistor.  

This product can be used to fix the hyper flash of the turn signal after installing LED bulbs.

-not for Switchback Dual colour bulb
-not for parking and turn signal which share same set of bulbs
-not for brake/tail and turn signal which share same set of bulbs
-not for brake lights

It can also be used to cancel the OBC or Bulb-Out Warning after install LED bulbs.

They are fully plug and play, simply plug the LED bulb to the socket of the canceler, then insert the plug of the canceler to the factory socket.

-100% Brand New
-Pre-wired, east plug and play
-Made with high quality Nylon Material, heat resistant
-Built-in LED Decoder and Resistor
-Compatibility: 7440

Lifetime Warranty!